-
Up for grabs here Holden fans is a pair of reproduction French locks for the rear universal flange bolts used in production on all Grey Motor powered Holden cars from 48-215 to EJ.
-
Reproduction anti- rattle bush for the column gear shift levers of all FB , EK , EJ , EH , HD and HR Holdens . This is a reproduction of Holden part number 7418341 , Group 4.017.
-
On offer here is a brand new repair kit for the temperature sender wire on HK HT and HG models equipped with 307 , 327 or 350 engines.
-
On offer here Holden fans is a new CORRECT SQUARE bonnet cable anchor or stopper and CORRECT SCREW to suit all Holden models from 48-215 to HG (except FB/EK which don`t have this type of bonnet release).
-
On offer here is a set of 4 reproduction exhaust manifold bolt "French locks".These are an exact copy of Holden part number 7437450 , group #3.275 - Plate -Bolt lock.
-
Yet another small but important detail part that adds that extra level of authenticity to your restored or original 48-EK Holden.
-
Out of stockHowdy all you Torana fans! I apologise for the delay , after many emails I have finally made some more outer door-belt weather-strip clips to suit the ever popular Holden Torana HB , LC , LJ and TA coupes including Brabham ,GTR and GTRXU-1 variants.
-
On offer here is a very nice reproduction of the factory Oil Pressure Sender Adapter used in all HK, HT, HG and HQ models where the combination of Chevrolet engine AND sports instrument/GTS dash is fitted.
-
Out of stockOn offer here is a PERFECT reproduction of the power steering ram hose to ram clip used on HK HT and HG models with 307, 327 and 350 Chev engines and power steering.
-
Brand new COMPLETE kit to suit the power steering ram or cylinder used on EH-HG Holdens with the original ram type power steering.
-
Reproduction set of the accessory heater control lever. This is the "extra" lever in the dash when an FB or EK was fitted with the optional Warmaride Heater.
-
On offer here is a nice reproduction of the original FB and EK "Package- Instrument Panel Compartment Lamp" as offered by Nasco under part number 7413720.
-
-
On offer here is a nice reproduction of the original FE and FC "Package- Instrument Panel Compartment Lamp" as offered by Nasco under part number 7406036.
-
Out of stockFront doors won`t stay open ??? Are you sick of having to hold the door open while you get out?? How many times has the front door slammed on your shin as you tried to get out of the car??
-
Howdy HK HT and HG fans. On offer here is a nice reproduction of the original T-Bar automatic shifter RELAY LEVER and BUSHES used on HK, HT and HG models equipped with factory floor shift automatic transmissions.
-
Out of stockFor sale in this listing is an exactly CORRECT reproduction power steering cap to suit EH HD HR HK HT and HG Holdens.
-
FX-FJ front door hinge hold open or detent springs.
-
Howdy 60`s Holden Fans. On offer here is a brand new inhibitor or neutral safety switch to suit factory column auto EK EJ EH HD and HR model Holdens.
-
Auto Choke Pipes, Suit HT, HG 308, Monaro & Premier. Reproduction automatic choke pipes to suit 308 Holden engined cars with the original Rochester Quadrajet 4MV 4bbl carburettor and remote or "divorced" automatic choke mechanism.
-
HT HG Holden Monaro Coupe Sedan 6 inch spare wheel retainer hold down bolt wingnut
-
On offer here is an excellent reproduction of the genuine Nasco accessory boot light package for all FB and EK sedan models including Standard 215 and Special 225 Sedans.
-
On offer here HT and HG Holden fans is a brand new CORRECT reproduction fuel pump to carburettor pipe to suit 253 Holden engined cars with the original Stromberg WW 2bbl carburettor.
-
On offer in this listing is a complete kit to allow a right-hand shift Trimatic auto to be shifted on the original column change of your HD or HR.
-
HT HG Holden 308 Carby Pipe.
-
On offer here Holden fans is a NEW reproduction Braided Metal Fuel Hose used in production on all Grey Motor powered Holden cars from 48-215 to EK.
-
Out of stockHi Torana fans , up for grabs here is a new old stock , genuine "metalastik" rubber steering coupling to suit the ever popular Holden HB LC LJ and TA Torana models including the Brabham , GTR , GTR XU-1 , S and SL variants.
-
Out of stockOn offer here is a perfect reproduction of the original EK Automatic models "Backup Lamp Package" as offered by Nasco under part number 7417766.
-
For sale in this listing Holden fans is a brand new reproduction air cleaner base to suit the WW Stromberg 2 barrel carburettor as used on 186-S HR, HK , HT and HG Holdens including Monaro GTS as well as Torana LC GTR models with 161-S / 2600-S or 173-S / 2850-S engines.
-
For sale here KTG fans is an excellent reproduction power steering hose "support and heat shield assembly". This is a reproduction of Holden part number 7437906 , Group # 6.672.
-
On offer in this listing is a complete kit to allow a right-hand shift Trimatic auto to be shifted on the original column change of your EH.
-
On offer here HK and HT Holden fans is a pair or reproduction Power Steering Hose brackets to suit Chev engined cars with short water pump.
-
On offer here Holden fans is a pair of NEW reproduction Braided Metal Transmission Cooler Hoses used in production on all automatic Holden cars from EK to HR.
-
On offer here Holden fans is a PAIR (2) of NEW reproduction Braided Metal BYPASS OIL FILTER Hoses for the AC TYPE engine oil filter fitted as an accessory to Grey Motor Holden models including 48-215 FX, FJ, FE, FC, FB, EK and EJ.
-
For your consideration here is the ONLY fully comprehensive Master Cylinder Kit on the market to suit the "oval top" or "bignut" GMH Master Cylinders fitted in production to HT and HG Holden models and LC 6 cylinder Torana models.
-
For your consideration here is the ONLY fully comprehensive Master Cylinder Kit including brand new pistons on the market to suit the "square top" style "big nut" GMH Brake Master Cylinders fitted in production to HQ , HJ, early HX Holden models and LJ, LH and early LX Torana models. Australian made !